I couldn’t say where police corruption is worse if I’m honest, I would guess its worse in America. But, Police violence is absolutely worse in America.

Regardless, I think the take away is: “whatever the intention, guns don’t equal civil liberties”.

I understood your point. I was showing that not only does America have “a lot” of government overreach, it has “more” government overreach. An Australian is less likely to be shot by another of its citizens and less likely to be imprisoned, enslaved, or killed by its government.

As a counter point, America has fewer gun restrictions and more convicts than Australia. Gun laws and government overreach do not seem connected.

Oh, routing, I remember watching an “off site back up” video where they set up IP tables, or IP forwarding, or some such, so when their parents tried to access jellyfin locally it was routed over tailscale. Maybe I’m misremembering though, I’m not confident enough to start thinking about it seriously, so I logged it as “that’s possible” and moved on.

That way I just have to keep one instance of jellyfin/immich/etc up to date. It’s all a bit beyond my ken currently but it’s the way I’m trying to head. At least until I learn a better way.

Ideally, I give someone a pi all set up. They plug it in go to service.domain.xyz and it routes to me. Or even IP:Port would be fine, I’ll write them down and stick it to their fridge.

My parents and I run each others’ off-site back up (tailscale-syncthing), but their photo and media services are independent from mine. I just back up their important data, and they return the favour, but we can’t access or share anything.

Guides like yours are great for showing what’s possible. I often find myself not knowing what I don’t know so don’t really know where to start learning what I need to learn.

What a write up, thank you for documenting this.

I understand a lot of people in this hobby do it professionally too, so a lot is assumed to be common knowledge us outsiders just don’t have.

While my system of using tailscale’s magic dns to use lxc:port works fine for my fiancée and I, expanding this a family wide system would prove challenging.

So this guide is next step. I could send my fiancée to <home.domain.xyz> and it’ll take her to homarr, or <jellyseerr.domain.xyz>

The ultimate dream would be to give family members a pi zero and a <home.domain.xyz> and then run a family jellyfin/immich.

Add “Trump”, Kamala" & “Stein” to your filter to block the spam. I added “Trump” to mine to save money on eye bleach.

I remember Watchtower helpfully stopping Pihole before pulling the new image when I only had the one instance running… All while I was out at work with the fiancée on her day off. So many teaching moments in so little time.

Posts on public forums get replies from the public.

As a beginner in self hosting I like plugging the random commands I find online into a llm. I ask it what the command does, what I’m trying to achieve and if it would work…

It acts like a mentor, I don’t trust what it says entirely so I’m constantly sanity checking it, but it gets me to where I want to go with some back and forth. I’m doing some of the problem solving, so there’s that exercise, it also teaches me what commands do and how the flags alter it. It’s also there to stop me making really stupid mistakes that I would have learned the hard way without.

Last project was adding a HDD to my zpool as a mirror. I found the “attach” command online with a bunch of flags. I made what I thought was my solution and asked chatgpt. It corrected some stuff: I didn’t include the name of my zpool. Then gave me a procedure to do it properly.

In that procedure I noticed an inconsistency in how I was naming drives vs how my zpool was naming drives. Asked chat gpt again, I was told I was a dumbass, if thats the naming convention I should probably use that one instead of mine (I was using /dev/sbc and the zpool was using /dev/disk/by-id/). It told me why the zpool might have been configured that way so that was a teaching moment, I’m using usb drives and the zpool wants to protect itself if the setup gets switched around. I clarified the names and rewrote the command, not really chatgpt was constantly updating the command as we went… Boom I have mirrored my drives, I’ve made all my stupid mistakes in private and away from production, life is good.

You gotta TAWK TUAH to get to know 'er.

Hehe, I see what you did there.

MLK on climate change (probably):

[…]that [humanities] great stumbling block in his stride toward freedom is not the [oil company] or the [billionaire] but the white moderate, who is more devoted to ‘order’ than to justice; who prefers a negative peace which is the absence of tension to a positive peace which is the presence of justice; who constantly says: ‘I agree with you in the goal you seek, but I cannot agree with your methods of direct action’; who paternalistically believes he can set the timetable for another man’s freedom; who lives by a mythical concept of time and who constantly advises [climate aware] to wait for a ‘more convenient season.’

The firestick is what I chose as my TV’s, a 10yo LG, jellyfin client. Works as intended, better really. One day I’ll block the stick’s internet connection, and it’ll be the almost perfect device, in that it plays almost anything natively. My server is a rpi4 so anything I can do to stop transcoding, I do.

Aoostar n100 2 Bay nas is what I’m currently thinking about. Or the same device but rebadged.

Pros: n100 for quicksync. 2 bays of HDD for media storage. Low power at idle. Cheap for a box with all relevant codecs + sata storage. High WAF compared to other HTPCs

Cons: Unknown brand for build quality and bios updates. General Chinese security anxieties. Idle power, while low, is higher than other n100 options. Fan isn’t pwm. Personally don’t like the aesthetics.

I guessed it was a “once bitten twice shy” kind of thing. This is all a hobby to me so the cost-benefit, I think, is vastly different, nothing on my setup is critical. Keeping all those records and up to date on what version everything is on, and when updates are available and what those updates do and… sound like a whole lot of effort when currently my efforts can be better spent in other areas.

In my arrogance I just installed Watchtower, and accepted it can all come crashing down. When that happens I’ll probably realise it’s not so much effort after all.

That said I’m currently learning, so if something is going to be breaking my stuff, it’s probably going to be me and not an update. Not to discredit your comment, it was informative and useful.

When I asked this question

So there are many reasons, and this is something I nowadays almost always do. But keep in mind that some of us have used Docker for our applications at work for over half a decade now. Some of these points might be relevant to you, others might seem or be unimportant.

• The first and most important thing you gain is a declarative way to describe the environment (OS, dependencies, environment variables, configuration).

• Then there is the packaging format. Containers are a way to package an application with its dependencies, and distribute it easily through the docker hub (or other registries). Redeploying is a matter of running a script and specifying the image and the tag (never use latest) of the image. You will never ask yourself again “What did I need to do to install this again? Run some random install.sh script off a github URL?”.

• Networking with docker is a bit hit and miss, but the big thing about it is that you can have whatever software running on any port inside the container, and expose it on another port on the host. Eg two apps run on port :8080 natively, and one of them will fail to start due to the port being taken. You can keep them running on their preferred ports, but expose one on 18080 and another on 19080 instead.

• You keep your host simple and empty of installed software and packages. Less of a problem with apps that come packaged as native executables, but there are languages out there which will require you to install a runtime to be able to start the app. Think .NET, Java but there is also Python out there which requires you to install it on the host and have the versions be compatible (there are virtual environments for that but im going into too much detail already).

I am also new to self hosting, check my bio and post history for a giggle at how new I am, but I have taken advantage of all these points. I do use “latest” though, looking forward to seeing how that burns me later on.

But to add one more:- my system is robust, in that I can really break my containers (and I do), and to recover is a couple clicks in Portainer. Then I can try again, no harm done.

Finally got it set up, pointed Prowlarr at it which synced to Sonarr and Radarr, not readarr or lidarr though. I couldn’t manually point readarr at it either without getting a

Query successful, but no results in the configured categories were returned from your indexer. This may be an issue with the indexer or your indexer category settings

which is a shame. Still a potentially powerful bit of kit regardless.

Ah, I knew it was bypassing the pi-hole, I thought it was IPv6. I think I made the mistake of changing more than one thing at once, what I did worked and I moved on to the next functionality I was chasing. I’ll try enabling IPv6 on the pihole, I know at least if I get Ads with it on its not IPv6.

You have cleared up a lot of misconceptions for me, I have not been port forwarding, I have not learned how yet. I think I’m good. I don’t mind breaking functional stuff, and have a lot already, but I really don’t want to explain to my fiancée that the reason someone is in her bank is because I wanted to watch Samurai Jack.

I have been keeping it as insular as possible for this reason, and the next thing I intent to learn is to make it more insular by putting the pi on a subnet of its own. Actually, thank you for writing that up. I have been actively resisting using people for IT support, as I know it takes time. I have been trying to find everything I can, there isn’t much or what there is assumes knowledge I don’t have.

There’s a comment with a list of stuff to do that I’ve saved. So I’ll probably start knocking that out one by one.

When it was active I was getting ads. I disabled the pi-hole registered an increase in traffic and there were no more ads. I don’t know why. It’s working as it is and I’ll tinker when I know more.

That’s a relief. Thank you.